Should You Hire a Professional to Repair Your Drywall?
A drywall is a great insulator, and it can take a lot of damage. But should you call a professional like Drywall Repair Las Vegas to fix your drywall or try it yourself.
Minor dents, dings, and nail holes can usually be patched with spackle or drywall compound. Use a putty knife to smooth the compound, feathering the edges of the repair to help it blend in with the wall.
Cracks in walls are a common occurrence in both new and older homes. In many cases, they are the result of house settling and can be easily remedied by re-taping the joints—the seams where the drywall panels meet. However, they can also flag more serious structural issues that require professional attention.
Using a utility knife, cut away any loose drywall along the edges of the crack. If possible, cut a strip of drywall tape along the length of the crack. Then, apply a thin layer of joint compound to the area around it and embed the strip of tape into it. Use a 6-inch putty knife to remove any excess compound and air from the area around the crack. Once the area is smooth, it’s ready to sand and repaint.
Most drywall cracks are cosmetic and can be fixed with a simple spackle and paint job. If the cracks are reoccurring or growing larger, though, it’s important to address the underlying cause. In most cases, this means re-taping the joints and taking further steps to prevent future cracks.
To do this, first assess the condition of the drywall. If the crack is in a spot where you can feel a stud behind it, it’s likely that the backing was not installed properly. If the crack is in an area where you cannot feel a stud, it may be caused by shifting foundation, framing deterioration from termites or wood-destroying insects, or other factors.
It’s also important to determine if the cracks are jagged or diagonal, as this is often an indicator of structural problems with the foundation or framing. In these cases, it’s recommended that you bring in a reputable builder or engineer to perform a professional inspection and pinpoint the problem. It’s usually necessary to take additional steps to stabilize or reinforcing the structure to prevent further damage and expensive repairs down the line. Once the issue is resolved, the drywall cracks will typically not return. In the meantime, it’s best to keep an eye out for any further signs of trouble such as moisture.
Drywall isn’t indestructible, but it can take a beating. If you have a hole in your wall caused by a nail or screw, it’s easy enough to fix. You just need a little spackle or joint compound, a putty knife and some sandpaper to make the repair.
Before you dig into the wall, however, be sure to check behind it for any wires or pipes. You don’t want to accidentally cut into anything important and have to deal with any problems that might arise from that.
When two sheets of drywall meet at a corner, the edges are protected by an L-shaped metal strip called a corner bead that is concealed with joint compound. This metal is pretty tough, but it’s not indestructible and can get dented by anything from a run-in with the vacuum cleaner to kids flinging toys around your house.
To repair a dent in the drywall, first hand-sand it to smooth any rough spots. Then, apply a coat of joint compound, letting it dry overnight. Using a putty knife, apply more compound and smear it into the wall until it’s flush with the rest of the wall. You can then sand again to prepare it for paint.
Large holes need a bit more work to fix than small ones. To do the job, start with a piece of scrap 2 x 4 framed out slightly larger than the hole. This will provide support to keep the patch in place while it’s being fixed and help prevent cracking after the repair is complete.
For holes 11/2 to 6 inches in diameter, you’ll need to bridge the gap with a stronger material than drywall mud. You can find a drywall patch kit at your hardware store that contains a pair of 8×8-inch fiberglass mesh squares.
To use these, simply peel off the paper backing and press the sheet of mesh over the damaged area, centered over the hole. Then, put a layer of joint compound over the mesh and let it dry completely. After the compound has dried, you can sand the patch lightly and prime it with an oil-based primer before painting it to match the rest of your wall.
A sagging ceiling is often a sign of structural issues within your home. If left unchecked, this problem can lead to further damage and possibly even partial or complete collapse of the structure. It is always best to call in a professional building inspector as soon as possible to determine the cause of the issue and to provide advice on the most appropriate course of action to take.
Often, ceilings will sag due to poor support systems such as inadequate joist size or weak or incorrect attachment points for screws. When a joist or framing member is unable to bear the weight of the ceiling, it will begin to deform and exert an excessive amount of force on the surrounding drywall which will eventually result in sagging.
Another common reason for sagging ceilings is moisture damage. When a ceiling is exposed to water, it can warp and even start to rot. This is why it is so important to always check the condition of your ceiling regularly and to ensure that all water leaks are fixed as soon as they are detected.
Finally, long-term exposure to vibrations can also cause a sagging ceiling. This can occur if you have roller garage doors in your home that create vibrations throughout the living space, or if you live near an industrial area with heavy traffic. Over time, these vibrations can cause the drywall to warp and weaken which will eventually lead to a sagging ceiling.
It is also worth noting that sometimes a sagging ceiling can be caused by the natural shifting of the foundations or frame of your building. This can happen as a result of seasonal temperature changes, which can cause materials to expand or shrink which can then affect the materials that are attached to them and hold them up, such as your drywall ceiling.
Adding texture to your walls or ceilings can make a huge difference in the appearance of a room. Choosing the right texture and technique will add color, depth and personality to a room that may be flat and boring. Many drywall textures have specific names and methods of application, some more complex than others. When repairing damage to a textured surface it’s important to understand how the texture was originally created in order to match it properly.
The first step is to repair any underlying damage to the drywall. This is done by filling any holes, cracks or gouges with spackle or drywall compound and sanding smooth. Next, prime the repaired area and a few inches beyond to help the new texture blend with the existing drywall.
Once the drywall patch is dry apply the desired texture to the entire wall or ceiling. It’s best to start with a light coat of texture and work your way up. The more you apply to the surface the harder it will be to get a good result.
There are a few basic types of drywall texture that most homeowners will be familiar with. Orange peel is a wrinkly texture that comes in fine, medium and heavy variations. It’s often found on walls but can be used on ceilings as well. Knockdown is a spray on texture that has peaks that can be knocked down after applying it. This is a popular texture choice for ceilings due to the ease of application and the ability to hide imperfections.
Skip trowel is a type of drywall texture that is a lot more common in modern homes. It’s easy to hide inconsistencies with this technique but can be difficult to match if damaged. It requires a great deal of practice on scrap pieces of drywall to really master.
A comb texture is a more structured style that’s frequently laid on in half fans and has a very planned appearance. It’s also relatively easy to match in case of repairs.
The last tip, and perhaps the most critical, is to pay close attention to the consistency of the mud used. This will make or break whether the finished drywall texture matches the original.